Raster Manager Guide
Raster Manager Guide
Raster Manager Guide

Rotate Raster

Use it!

Used to rotate an image. The Rotate Raster tool cannot be used with rasters that have the Apply Rotation and Affinity to Raster option turned off.

Tool SettingEffect
Method

Sets the method used to rotate.

  • Active Raster — the raster is rotated by the angle value, which can be keyed in or selected.

  • 2 Points Rotate — the angle of rotation is defined by entering two data points.

  • 3 Points Rotate — the angle of rotation is defined by three data points.

To rotate an image to a specified angle
  1. Select the Rotate Raster tool.

  2. Enter a data point to define the pivot point.

  3. If Method is set to Active Rotate, enter the wanted angle value. The arrows will increase or decrease by 90 degrees at a time. Otherwise, continue with step 4.

  4. If Method is set to 2 Points Rotate, enter a data point to define the angle of the rotation. Or if Method is set to 3 Points Rotate, enter a data point to define the start of the rotation. If Method is set to 2 Points Rotate, the raster is rotated; repeat to rotate the raster again. Otherwise, continue with step 5.

  5. Enter a data point to define the angle of the rotation.

Key-in: RASTER ROTATE [ACTIVE | 2POINTS | 3POINTS]